hello@allbuildsa.com.au
Ceiling hoist packages
Ceiling hoist packages and prices in Adelaide
Installed and NDIS-ready.
Your partner for safe and efficient transfers in Adelaide. NDIS registered builder, metro Adelaide, with certified engineering included.
Co-branded by Bunnings & AllBuildSA
Preferred installation partner for South Australia.
Package 1
Standard straight rail
$10,990
incl. GST, installed
For single-room transfers (e.g. bed to wheelchair), in rooms up to 4 × 4 m.
Book this package
Package 2
Full XY rail system
$14,490
incl. GST, installed
Allows movement in all directions within the room, in rooms up to 4 × 4 m. Recommended for maximum flexibility.
Book this package
Both packages include
Molift Air 200 hoist unit (205 kg SWL, quiet, compact)
Ceiling track, straight or full XY grid
Steel Unistrut ceiling reinforcement (for all ceiling types)
Labour, installation and clean-up
12-month installation warranty
Molift manufacturer warranty
Important notes
Fixed pricing applies to standard rooms up to 4 × 4 m.
Metro Adelaide only. A travel surcharge applies outside the region.
Complex ceilings (concrete, multi-storey, heritage) may require a quote.
Installations are carried out by NDIS-registered and fully insured builders.
Why choose a ceiling hoist?
Safer transfers with one carer
Eliminate unsafe lifting
Reduce injury risk.
One carer operation
No need for a second person.
Dignified transfers
Independent, safe and smooth.
Funding eligible
NDIS and aged care funding eligible.
Preferred partner
Preferred installation partner for South Australia.
Our services
Installation, inspection and funding
Fixed-price installation
We supply and install the Molift Air 200 ceiling hoist with either a straight track or a full XY system. The compact motor weighs only 8.6 kg yet offers a safe working load of 205 kg.
An XY system is recommended for maximum flexibility, allowing transfers anywhere within the room.
Periodic inspections
The Molift Air requires a visual periodic inspection at least once every year (or more often if required by local regulations).
Inspections must be carried out by authorised service personnel, and any defect means the hoist must be taken out of service until repaired.
Hoist inspections
NDIS and savings
The Molift ceiling hoist is typically funded through NDIS Assistive Technology and lets a single carer complete transfers safely.
By investing in a hoist, you may reduce the need for a second carer during transfers, saving both time and money.
More lifting solutions
When a ceiling hoist is not the right fit
Contact our team to discuss the best model for your circumstances.
Foldable floor hoist
Molift Smart 150
A lightweight floor hoist with a safe working load of 150 kg, weighing just 26 kg.
It folds down to fit in a car boot or cupboard, ideal for travel, rental homes or occasional use, and can lift from the floor or bed to a chair.
Free-standing gantry
Molift Duo Gantry
No ceiling installation needed. The anodised aluminium frame is height-adjustable between 2250 mm and 2550 mm and supports a safe working load of 300 kg.
Pair it with the Molift Air motor when ceiling reinforcement is not possible or for temporary installations.
Mobile floor hoist
Molift Mover 205
Need more capacity? Mobile floor hoists such as the Molift Mover 205 offer a higher safe working load and a long lifting range for heavier users.
Book online
Book your installation or annual inspection
Choose New Installation or Annual Inspection below.
Why All Build SA
Why choose All Build SA?
All Build SA is a registered NDIS provider specialising in home modifications and assistive technology installations across South Australia. We provide complete solutions including engineering certification, structural reinforcement and professional installation. As an authorised Novis Healthcare dealer, we offer the full Molift range.
Trained in Molift systems
Safe working load clearly marked on each hoist
Annual inspections, as required by Molift
Contact us
Have questions?
Talk to Mark
Call 0428 896 789 or email hello@allbuildsa.com.au.